Konica Minolta DI3510 - Manual (Page 19)

Introduction
1
Di2510/Di3010/Di3510 1-7
1.5 Components and Their Functions
2 1
3 4
6
5
8
7
No. Part Name Description
1 Duplexing Document
Feeder AFR-19
(optional) Automatically feeds one document sheet at a time for
scanning, and automatically turns over double-sided
documents for scanning
Referred to as the “duplexing document feeder”
throughout the manual.
2 Original Cover Kit OC-6
(optional) Presses down on the loaded document to keep it in
place
Referred to as the “original cover” throughout the
manual.
3 Copy Desk CD-4M
(optional) The copier can be placed on the copy desk.
Using the copy desk allows the copier to be set up on the
floor.
Referred to as the “copy desk” throughout the manual.
4 Large Capacity Cabinet
PF-122 (optional) A large-capacity paper supply cassette that can supply
2,500 sheets of paper.
Referred to as the “large capacity cabinet” throughout
the manual.
5 2 Way Paper Feed
Cabinet
PF-210 (optional) A two-level paper supply tray. Each paper supply tray
can hold up to 500 sheets of paper.
Referred to as the “paper feed cabinet” throughout the
manual.
6 Job Separator JS-203
(optional) Allows printed pages to be separated
Pull the lever when taking out the paper.
• In order to use the job separator, the switchback unit
must be installed.
7 Duplex Unit AD-16 Automatically turns the pages over, and prints on both
sides. Referred to as the “duplex unit” throughout the
manual. When using the duplex unit, the switchback unit
is required.
8 Switchback Unit SB-1 When copying to both sides of a page, this turns over the
paper. Required when using the duplex unit.