Konica Minolta DI3510 - Manual (Page 210)

10
Original Documents
10-10 Di2510/Di3010/Di3510
To position transparent or translucent documents
Follow the procedure described below when copying documents, such as
overhead transparencies, tracing paper or diazo photosensitive paper.
1
Lift open the original cover, or the
duplexing document feeder if it is
installed, and then position the
document face down on the original
glass.
2
Position the document so that it
aligns with the arrow in the upper-
left corner of the document scales.
3
Place a blank sheet of paper of the
same size over the document.
4
Carefully close the original cover, or
the duplexing document feeder if it
is installed.