Konica Minolta DI3510 - Manual (Page 211)

Original Documents
10
Di2510/Di3010/Di3510 10-11
To position books or magazines
Follow the procedure described below when copying bound documents,
such as books and magazines.
1
In the Basics screen, touch [Orig. > Copy], and touch [Book]. Then,
make other settings.
2
Lift open the original cover, or the
duplexing document feeder if it is
installed.
3
Position the document face down
on the original glass, with the top of
the book toward the rear of the
copier and with the center of the
book aligned with the book mark in
the document scale.
4
Carefully close the original cover, or the duplexing document feeder if
it is installed.
✎
Note
For thick documents, make the copy without closing the original
cover or duplexing document feeder.
While the document is being scanned with the original cover or
duplexing document feeder open, do not look directly at the bright
light that may shine through the original glass.
If the document is not positioned correctly, the copies will not be
printed in the correct sequence.
Lift open the original cover, or the duplexing document feeder if it
is installed, 15° or more.
Do not place objects exceeding 3 kg on the original glass.
If a book is placed on the original glass, do not press it down with
extreme force, otherwise the original glass may be damaged.
✎
Tip
For details, refer to “Copying a Book” on page 11-25.