Konica Minolta DI3510 - Manual (Page 241)

Specifying Copy Settings
11
Di2510/Di3010/Di3510 11-9
Creasing and Folding
When the optional finisher or saddle kits are installed, you can set a
crease to fold paper in two. Additionally, you can add two staples in the
middle of the paper (center stapling).
Before selecting the “Crease” setting, be sure to select the “Booklet
Creation” setting from the Orig. Ö Copy screen. (Refer to page 11-21.)
1
Position the document(s) to be copied.
2
Select “Non-Sort”, “Sort” or “Group”,
and then touch [Crease].
❍ When using Center staple,
(folding), select the [2-Point
Staple] key.
3
Press the [Start] key.
The copies are printed.
✎
Note
Creased and 2-point staple can be applied to A3, B4, A4, and B5 sized
paper.
2 to 15 sheets of paper can be stabled.
Only plain and recycled paper can be creased or 2-Point Stapled.