Konica Minolta DI3510 - Manual (Page 245)

Specifying Copy Settings
11
Di2510/Di3010/Di3510 11-13
11.2 Specifying a Zoom Setting
Copies of documents can be enlarged or reduced.
In the touch panel, touch [Basics], and then touch [Zoom]. A screen
appears, showing the available Zoom settings.
There are eight ways to change the zoom ratio.
● Auto Size
The most appropriate zoom ratio based on the size of the document
loaded and the specified paper size is automatically selected.
● Full-Size
A copy that is the same size as the document (× 1.000) is selected.
● Enlarge
Various zoom settings for making enlarged copies from common
standard document sizes to standard paper sizes are available.
For example:
❍ An A4-size document can be copied onto the larger A3-size paper.
❍ A B4-size document can be copied onto the larger A3-size paper.
● Reduce
Various zoom settings for making reduced copies from common
standard document sizes to standard paper sizes are available.
For example:
❍ An A3-size document can be copied onto the smaller A4-size paper.
❍ A B4-size document can be copied onto the smaller A4-size paper.
● Minimal
The copy is slightly reduced (× 0.930).
❍ Selecting the “Minimal” setting ensures that any part of the original
positioned at the edge of the page will not be cut off in the copy.
❍ The zoom ratio of the “Minimal” setting can be changed to any ratio
between × 0.900 and × 0.999.
● Zooming
Any zoom ratio (between × 0.250 and × 4.000) can be specified.