2 stopping copying, To stop/restart/delete a copy job, Stopping copying -3 – Konica Minolta DI3510 User Manual
Page 93: To stop/restart/delete a copy job -3
Advertising
Basic Copy Operations
5
Di2510/Di3010/Di3510
5-3
5.2
Stopping Copying
Follow the procedure described below to cancel a copy job.
To stop/restart/delete a copy job
1
Press the [Stop] key while the job is
being printed.
Copying stops.
2
The message “Copy cycle
temporarily suspended.” appears.
3
To restart a job that has been
stopped, press the [Start] key.
Copying continues.
4
To delete the stopped copy job,
select the button for the job that you
wish to delete.
The job is deleted.
Advertising