Konica Minolta DI3510 - Manual (Page 95)

Basic Copy Operations
5
Di2510/Di3010/Di3510 5-5
5.4 Making Copies Using Accounts
Using the “Copy Track Mode” Parameter
The number of copies allowed for each registered account can be
restricted.
The accounts can be managed by touching [Account management] on the
Admin. 1 screen (displayed by touching [Admin. Management] on the
Utility screen). The Administrator Management settings should be
specified by the administrator.
✎
Note
The Administrator Management parameters cannot be set by anyone
without knowledge of the administrator access code.
For details on the administrator access code, contact your service
representative.
To make copies when accounts are specified
When managing using [100 Account 1] and [100 Account 2].
1
If [100 Account 1] has been
specified, the screen shown at right
is displayed.
❍ If [100 Account 2] has been
specified, pressing the [Access]
key will display the screen
shown at right.
2
Enter the 6-digit access code using
the 10-Key Pad.