Konica Minolta IC-204 - Manual (Page 75)

3 Setting Up Network Printing
3-10 IC-204
3.5 Raw/LPR Printing
This model supports the Raw printing service and LPR printing service. The
Raw printing service is available with Windows 98SE/Me/2000/XP/Server
2003/XP x64/Server 2003 x64 and the LPR printing service with Windows NT
4.0/2000/XP/Server 2003/XP x64/Server 2003 x64. TCP/IP is used as the
network protocol.
2
Note
When conducting the Raw printing with Windows 98SE/Me, an applica-
tion referred to as [Peer to Peer Tool] may be necessary. For more details,
contact your service representative.
Operations on This Machine
% Set the IP address for this machine.
–
For the setting procedure, refer to “Setting the IP Address for This
Machine” on page 3-5.
Printer Driver Settings
For Windows 2000/XP/Server 2003/XP x64/Server 2003 x64
1
For Windows 2000, click the [Start], point to “Settings”, and then click
“Printers”.
For Windows XP/Server 2003/XP x64/Server 2003 x64, click the [Start],
and then click “Printers and Faxes”.
2
Right-click the icon of the installed printer, and then click “Properties”.
3
On the Ports tab, click the [Add Port].
4
In the “Available Printer Ports” list, select “Standard TCP/IP Port”, and
then click the [New Port].
5
When the Add Standard TCP/IP Printer Port Wizard starts up, click the
[Next].
6
In the “Name of printer or IP address” box, enter the IP address for this
machine, and then click the [Next].
7
Select “Custom”, and then click the [Settings].