Kenwood RECEIVER KRC-36 - Manual (Page 10)

Setting the volume during Traffic Information.
1 Receive the station.
2 Set the volume you want.
3 Preset the volume
Press the [VOL ADJ] button for at least 2 seconds.
The volume level display blinks 1 time.
Presetting Volume for Traffic Information
Switching to traffic information automatically when a traffic
bulletin starts even when you aren't listening to the radio.
Press the [TI] button.
Each time the button is pressed the Traffic Information function
turns ON or OFF.
When it's ON, "TI" indicator is ON.
When a traffic information station isn't being received the "TI"
indicator blinks.
When a traffic bulletin starts, "TRAFFIC" is displayed it and it
switches to traffic information.
During reception of a AM station when the Traffic Information
function is turned ON, it switches to a FM station.
Receiving other traffic information stations
Press the [ 4] or [¢] button.
Traffic information station switching can be done when listening to
the radio.
Traffic Information
Function of the KRC-391/36/394/37
RDS features
— 10 —
English
#1 – 6
AM PTY 4 ¢ FM
TI/VOL ADJ CLK
PTY indicator
TI indicator
KRC-394(E)_U.S r1 02.9.24 11:11 AM Page 10