Mounting engine sprocket, Mounting the ignition (kokusan), 12 3 4 a b c – KTM 250 SX User Manual

Page 65

Advertising
background image

Repair manual KTM 250 / 300 / 380

Art No 3206004 -E

6-10C

Mounting engine sprocket

– Lubricate O-ring

1

with oil and slide over counter shaft.

– Slide distance bushing

2

in position so that O-ring is in correct

position.

– Slide sprocket onto the countershaft with the collar facing inward, and

fix it with the circlip

3

(sharp edge facing outward).

Mounting the ignition (Kokusan)

– Insert the woodruff key into the crankshaft.
– Apply Loctite 243 to 3 screws

4

and fix the stator (do not yet tighten

the 3 screws all the way).

– Turn stator such that the mark

A

on the stator coincides with the mark

in the casing, and tighten the 3 screws of the stator.

– At engines with ignition type 2K-4 the marking

C

must coincide with

the marking on the stator.

– At engines with all other ignitions (not SEM) the marking

B

must

coincide with the marking on the stator.

– Mount the rotor.
– Mount the detent edged ring and the nut.
– Hold the rotor with the holding spanner and tighten the nut with 60

Nm (45 ft.lb.).

1

2

3

4

A

B

C

Advertising
This manual is related to the following products: