Kodak Ektapro Slide Projector 4020 - Manual (Page 80)

Master Board PCB
1 . Remove the UPPER HOUSING. See page 4-1.
2 . Remove the CENTER HOUSING. See page 4-4.
3 . Remove the FAN, KEYBOARD PCB and the TRAY MOTION PCB. See page 4-9.
4 . Remove TRANSFORMER, POWER SUPPLY PCB and BACK PANEL ASSEMBLY. See page 4-11.
5 . Remove the MECHANISM FRAME and LENS MOUNT. See page 4-12.
6 . Disconnect all CONNECTORS from the MASTER PCB. See page 4-23:
7 . Remove the SCREW and the COVER.
8 . Remove the MASTER PCB.
SCREW
COVER
MICROCONTROLLER
MASTER BOARD PCB
figure 4-28
Service Manual SM2547-1
03/98 4-22 Kodak AG, Stuttgart