LG 47WV30-BAAM - Manual (Page 15)

15
ENG
ENGLISH
ASSEMBLING AND PREPARING
Set 4 joined to the rest of the sets
(2 x 2 tiling)
Wall mount plate or wall
Display set
Loosely mount Set 4 to the wall mount plate or the wall and minimize the space between the sets using
the U-shaped fixtures.
When Set 4 is firmly mounted to the wall, remove the U-shaped fixtures.
Remove the guide brackets. See <How to Join Sets - Installing Set2,3>.
Now the 2 x 2 tiling is complete.
You can tile in various combinations, such as 3 x 3.
How to Join Sets - Installing Set 4
y The guide brackets for tiling should only be used to join sets and should be removed once they are joined.
y The guide brackets should only be used as the assisting tool when tiling sets. The load applied to each set
should be supported by the wall mount plate or the wall using a VESA wall mount (800 x 400).
y (Each set must be firmly mounted to the wall mount plate or the wall.)
y The guide brackets must be removed once the sets are joined. When joining the sets without removing the
guide brackets, extra caution is required to prevent damage due to the set weight.
y The U-shaped fixtures must also be removed after mounting the set to the wall mount plate or the wall.
y You may mount the set without using the guide brackets or the U-shaped fixtures; this does not affect the
performance of the device.
NOTE