Lanier 5635 - Manual (Page 122)

Paper Size Setting 1 of 3
5 - 6 User Tools Settings
Paper Size Setting 1 of 3
Paper Tray Priority (Copy/Document Server)
You can specify the output tray for delivery.
Default: Internal tray 1
Paper Tray Priority (Fax/Printer)
You can specify the output tray for delivery.
Default: Internal tray 1
Tray Paper Size: (Tray 1–4)
Select the size of the copy paper set in the paper tray.
Note: If the specified paper size differs from the size of paper actually set in the
paper tray, a paper misfeed might occur because the paper size is not detected
correctly
•
The tray fence for the optional large capacity tray (LCC) is fixed. If you need to change
the paper size, contact your service representative.
•
If the paper size set for the dial in paper tray 1 and 2 is different to the paper size for this
setting, the paper size of the dial has priority.
•
If you load paper in tray 1 or 2 that is not available on the paper size dial, set the dial to
“*”.
•
The paper sizes you can set for (Tray1–4) are as follows:
16K L, 11" x 17” L, 8 1 /2” x 14" L, 8 1 /2” x 11" K, 8 1 /2” x 11" L, 8" x 13" L,
8 1 /2” x 13" L, 8 1 /4” x 13" L, 8 1 /4” x 14" L, 11" x 14" L, 7 1 /4” x 10 1 /2”L,
8" x 10 1 /2”K, 8" x 10 1 /2”L, 5 1 /2” x 8 1 /2”L