Lanier 5635 - Manual (Page 184)

Stamp
6 - 14 Special Copier Functions
User Stamp
1
Touch the Edit/Stamp key.
2
Touch the Stamp key.
3
Touch the User Stamp key.
4
Select the desired stamp.
5
Touch the All Pages or 1st Page
only key to select the print page.
To Change Stamp Position
1
Touch the Change key.
32 MB of memory is required to use this function. If the unit is equipped with a printer unit, the
32 MB of memory is not required.
•
Up to four messages which you use frequently can be stored in memory and stamped
on copies.
•
Only one message can be stamped at a time.
•
The Bypass Tray can not be used with this function.
•
The stamp position and default settings can be changed.