Lanier 5635 - Manual (Page 187)

Stamp
Special Copier Functions 6 17
6
Touch the Program/Delete
Stamp key.
Programming the User Stamp
1
Press the Program key.
2
Touch the stamp number from 1-
4 that you want to program.
•
Stamp numbers with the data
in symbol in front of it are
already in use.
•
If the stamp number is being
used, the message on the
display asks if you want to overwrite it. Select either Yes of No.
3
Enter the stamp name using the
letter keys in the message
display.
•
Up to 10 character can be
entered.
4
Touch the OK key.
5
Enter the horizontal size of the
stamp using the keypad. Then
touch the # key.
6
Touch the Veritcal key, and
enter the vertical size of the
stamp using the keypad. Then,
touch the # key.
7
Set the User Stamp on the exposure glass and then touch the Start Scanning key.
•
The machine scans the original three times. Do not lift the document feeder until the