Lenovo X230 - Manual (Page 164)

Problems with ports and connectors
The following are the most common problems with ports and connectors.
A USB problem
Problem: A device connected to the USB connector does not work.
Solution: Open the Device Manager window. Make sure that the USB device setup is correct, and that the
assignment of computer resource and the installation of the device driver are correct. To open the Device
Manager window, click Start ➙ Control Panel ➙ Hardware and Sound ➙ Device Manager. If you are
prompted for an administrator password or confirmation, type the password or provide confirmation.
Refer to “Diagnosing problems” on page 131 for a diagnostic test of the USB connector.
A docking station or port replicator problem
Problem: The computer does not start when you try to turn it on, and does not respond when you try to
resume operation.
Solution: Make sure that:
• The ac power adapter is connected to the docking station or the port replicator.
• The indicator of the docking station is on.
• The computer is securely attached to the docking station or the port replicator.
146 User Guide