Connecting with the pc, E1910t/e2210t, Connecting the display – LG E1910S User Manual

Page 10

Advertising
background image

9

Connecting the Display

E1910T/E2210T

NOTE

‘ Self Image Setting Function’? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals.
‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen
flicker or tilted screen while using the device or after changing screen resolution, press the
AUTO function button to improve resolution.

A

B

Connect DVI-D(Digital signal) Cable
Connect D-sub(Analog signal) Cable

1.

Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.

2.

Connect signal input cable and power cord in order, then tighten the screw
of the signal cable.

Connecting with the PC

1

2

PC

PC

A

B

Wall-outlet type

Mac adapter : For Apple Macintosh use, a
separate plug adapter is needed to change the
15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2
row connector.

When using a D-Sub signal input cable connector
for Macintosh

Varies according to model.

DVI-D (This feature is not available in all countries.)

NOTE

This is a simplified representation of the rear view.

This rear view represents a general model; your display may differ from the view as shown.

3.

Press the power button on the front panel to turn the power on. When monitor power is
turned on, the 'Self Image Setting Function' is executed automatically.

(Only Analog Mode)

Power Button

Connect the signal
input cable and tighten
it up by turning in the
direction of the arrow
as shown in the figure.

Advertising
This manual is related to the following products: