Lenovo IDEAPAD K1 - Manual (Page 49)

45
Lenovo IdeaPad Tablet K1
1110 Antenna assembly
For access, remove these FRUs in order:
• “1010 Base cover” on page 31
• “1020 Battery pack” on page 33
• “1030 Middle cover” on page 34
• “1040 Docking bracket” on page 35
• “1050 System board” on page 36
• “1060 Switch board, SD board and HDMI board” on page 38
• “1070 Speaker” on page 41
• “1080 Optical finger navigation (OFN) module” on page 42
• “1090 Panel support bracket” on page 43
Figure 13. Removal steps of antenna assembly
Peel off the adhesive tapes securing the antenna boards, and then remove the
antenna assembly in the direction shown by arrows 1 .
1
When installing: Route the antenna cables along the cable guides and secure
the antenna boards with adhesive tapes. As you route the cables, make sure
that they are not subjected to any tension. Tension could cause the cables to
be damaged by the cable guides, or a wire to be broken.