Panasonic CT-32HXC43 - Manual (Page 28)

26 l
I C ON M ENU S O PERA TION
E
N
G
L
IS
H
LOCK (cont.)
Main and Split Blocking Message
If V-Chip is enabled and the program exceeds the rating
limit set by you, the blocking message will appear and the
audio will be muted. Enter your four-digit secret code if you
wish to continue viewing the program. After entering your
code, all locks and rating blocks are disabled until the TV is
turned off or until all settings are off.
Note: If you enter your four-digit secret code to override rating
blocks, you must reset all rating blocks by either
reprogramming or turning the TV off.
PIP Blocking Message
PIP function is available when V-chip feature is activated. If
the program being viewed in PIP exceeds the set rating
limit, PIP will disappear and a blocking message will
appear on screen.
Note: If the V-chip feature is activated while PIP is on, PIP will
immediately disappear. Enable PIP functions by setting
V-CHIP ratings to OFF.
SET UP
r While the desired sub menu is highlighted, press VOL u to
select or activate feature.
r IDIOMA/LANGUE - Select to change menu language
to ENGLISH, ESPAÑOL (Spanish) or FRANÇAIS
(French).
r ANTENNA - To select either ANT1 or ANT2.
r
ON MUTE - Activates the onscreen Closed
Caption feature when the MUTE button on the remote
control is pressed. To deactivate press MUTE again.
r MODE - This television contains a built-in decoder
that displays (Closed Captioned) text across the
screen (white or colored letters on black background).
It allows the viewer to read the dialogue of a television
program or other information. The program viewed
must include Closed Captioning for the feature to work.
Activate the onscreen Closed Caption feature by
selecting one of the following modes.
• OFF - When Closed Caption is not desired.
• C1 - For video related information to be displayed, up to
4 lines onscreen at a time. (It does not block relevant
parts of the picture). Text may be in any language.
• C2 to C4 - For other modes of video related information.
• T1 to T4 - For program guide and other information to be
displayed, when available. (Blocks a large portion of the
picture on the television screen).
Note: C1 mode is recommended for viewing Closed Caption.
r OTHER ADJ.
Highlight OTHER ADJ. and press VOL
u to enter sub sub-
menu field.
Note: While sub sub-menu features are highlighted, press
VOL
u to adjust or activate.
• MODE - To select TV (antenna) or CABLE mode
depending on the signal source.
• AUTO PROGRAM - To automatically program all
channels with a signal.
• MANUAL PROGRAM - To manually add or delete
channels.
• AUTO POWER ON - Select SET to power up the TV at
the same time as the Cable box or other components or
select OFF.
• CHAN BANNER - Select ON to display onscreen banner
when changing channels.
• GEOMAGNETIC CORR - This feature is used to
adjust discoloration of the picture due to earth’s
magnetic field in the area.
• TILT CORRECTION - This feature is used to adjust
the tilt of the picture due to earth’s magnetic field in
the area.
• IMAGE SHIFT - Selecting ON is recommended for this
feature to prevent image retention on screen.
Main Picture Split Picture
CC
CC
CC