Panasonic CT-32HXC43 - Manual (Page 8)

6 l
O PTION AL E QUIPMENT C ONN ECTIONS
E
N
G
L
IS
H
Optional Equipment Connections (cont.)
VCR and Cable Box Connection (Cont.)
Note: Models CT-32HC43, CT-36HC43 and CT-32HXC43 do
not have DIGITAL INPUT.
Recording a premium (scrambled) cable channel
Procedure
• Select ANT2 in the SET UP menu.
• Press the TV/VIDEO button on the remote control to
select the video input (VIDEO 1, VIDEO 2, etc.)
connected to your VCR.
• Turn the VCR ON.
• Tune the VCR to Channel 3 or 4, depending on the
switch setting on the back of VCR.
• Using your cable box, tune to the premium cable channel
you want to record.
• Begin recording.
r To view a different channel while recording:
• Select ANT1 in the SET UP menu.
• Press the TV/VIDEO button on the remote control to TV
mode.
• Tune the television to a program (except another
premium cable channel).
Amplifier Connection (TO AUDIO AMP)
To listen the audio through a separate stereo system,
connect an external audio amplifier TO AUDIO AMP
outputs on back of television.
Note: TO AUDIO AMP terminals cannot be connected directly
to externalspeakers.
Audio Adjustments
• Select SPEAKERS ON located in the onscreen AUDIO
menu.
• Set amplifier volume to minimum.
• Adjust television volume to desired level.
• Adjust amplifier volume to match the television.
• Select SPEAKERS OFF & VARIABLE AUDIO OUT from
AUDIO menu.
• Volume, mute, bass, treble and balance are now
controlled through the television.
Note: Select SPEAKERS OFF & FIXED AUDIO OUT to control
audio functions through the external amplifier.
Digital TV - Set-Top Box (DTV-STB) or DVD
Connection
This television is capable of displaying 1080i and 480p DTV
signals when connected to a DTV tuner set-top-box (STB). In
order to view DTV programming, the STV must be connected
to the component video inputs (Y,PB,PR) of the television. A
DTV signal must be available in your area. Select the output of
the STB to either 1080i or 480p.
This television also utilizes a progressive scan doubler, which
de-interlaces the NTSC signal and progressively scans the
image. This allows you to sit close to the TV and not see the
thin black horizontal lines (venetian blind effect) associated
with interlaced TV pictures.
Use this diagram to connect the DTV-STB (Digital TV Set-Top-
Box) or DVD player to the back of
Front Control Panel
The front control panel can be used to access menus and
switch video mode when the remote control is not
available.
A second VCR, Camcorder, a video disc player, video
game equipment or DSS equipment can also be connected
to the video inputs. See the optional equipmentmanual for
details.
Procedure
• Connect equipment to front Audio/Video input jacks.
• Press TV/VIDEO button to select VIDEO 4 input mode.
• Operate optional equipment as instructed in equipment
manual.
Note: The ON/OFF indicator LED (red) will be lit when set
is on.