Philips MX6000I/37 - Manual (Page 12)

Before you make connections, make sure the unit is
not connected to the power supply.
Assembling of the speakers
You can use the subwoofers as speaker stands for the front
or for the rear speakers.The following text describes the
setup of the subwoofers in the front.
Attaching the front speakers to the subwoofers
1
Connect the speaker cables to the connectors on the
bottom of the subwoofers before attaching the front
speakers.
2
Put the front speakers on top of the subwoofers and press
them down gently until you hear a “click.”
➜ The front speakers are now connected to the
subwoofers.
3
Next, attach the rear speakers to the wall or use the
supplied mini speaker stands.
Attaching the mini speaker stands to the rear
speakers
● Attach a supplied speaker stand firmly to the bottom of
each rear speaker using the supplied screws.
Attaching the rear speakers to the wall
1
Attach the supplied bracket firmly to the rear of the rear
speaker using the supplied screws.
2
Hook the speaker carefully onto a screw in the wall, using
the hole in the bracket.
Positioning of the speakers and
the subwoofers
1
Place the subwoofers with the front speakers at an equal
distance to your TV.The distance between your listening
position and the left and right front speakers should be
approximately equal to the distance between the left and
right front speakers.
2
Place the center speaker on top of the TV.
3
Place the left and right rear speakers to the left and right
of your preferred listening position.
Notes:
Keep the speakers away from the room´s corners.
Position the speakers at ear level.
Leave enough space between the left and right front
speakers and the TV to avoid magnetic interference.
Connecting …
12
English
white (red) purple
front R,
subwoofer
rear R
centre
rear L
front L,
subwoofer