Philips MX6000I/37 - Manual (Page 41)

Night Mode
Night mode reduces the volume differences between loud
and quiet passages. At night, you can enjoy surround effects
at low volume without disturbing your children or
neighbors. Night mode is available only for Dolby Digital
and MPEG multi-channel signals and only if supported by
the source material (e. g. a movie).
1
Press SYSTEM MENU on the remote control.
2
DVD: Select Preferences ➜
Sound
➜
Night Mode
.
INTERNET, PC LINK: Select Audio ➜
Night Mode
.
3
Press
2 repeatedly to switch Night Mode on or off. Next,
press
2OK to confirm.
Analogue Output
This feature is similar to selecting the surround sound with
SURROUND on the remote control.
1
Press SYSTEM MENU on the remote control.
2
DVD: Select Preferences ➜
Sound
➜
Analogue
Output
.
INTERNET, PC LINK: Select Audio ➜
Analogue
Output
.
3
Press
4 repeatedly to select Multi-channel, Hall or
Stereo
. Next, press 2OK to confirm.
Note: If you connected any equipment (e. g. a tape deck) to
LINE OUT on the Streamium System and the equipment is
suited for stereo signals only, set Analogue output to
Stereo
.
Digital Output
Adjust Digital Output if you have connected the Streamium
System´s DIGITAL OUT to external digital equipment.
1
Press SYSTEM MENU on the remote control.
2
DVD: Select Setup ➜
Audio Menu
➜
Digital Output
.
INTERNET, PC LINK: Select Audio ➜
Digital Output
.
3
Press
3 or 4 to select
– Off if you do not use DIGITAL OUT in your
connections.
– PCM only if you use DIGITAL OUT in your
connections, but the Stereo equipment does not include
a built-in digital multi-channel decoder.
– All if you have connected the Streamium System to
Stereo equipment that has a built-in multi-channel
decoder.
4
Next, press 2OK to confirm.
System Menu – Audio settings
41
English
Preferences
Sound View Program
DVD Stop
Analogue Output
ClearVoice
Night mode off on
Use
= to toggle the value, ≠ or ± to move to other options.