Panasonic Laser Fax UF-6000 - Manual (Page 123)

123
Chapter 5 Internet Fax
Setting Subject
Every time you send an Email, you can enter its
subject manually. To enter a subject, follow the
steps below.
z The default subject is preset if the Function
Parameter “21 Default Subject” (Fax/Email
Settings > User Parameters) has been set. For
programming instructions, refer to Fax/Email
Settings in the Operating Instructions (For
Function Parameters) of provided CD-ROM.
1
On the Email screen, select “Subject”.
(See pages 111 and 120)
2
Enter a subject, and then select “OK”.
z The subject field is up to 40 characters in
length.
z For instructions on using the onscreen
Keyboard, refer to Before Starting in the
Operating Instructions (For Function
Parameters) of provided CD-ROM.
z If you make a mistake, select “Back Space”
to delete one character at a time, or move the
cursor to the beginning of the field, and then
press the Clear key to delete the entire entry.
3
Press the Start key.
The original(s) are stored into memory with a
file number. Then the Email transmission
starts.
Confirming the Destination
You can confirm the entered destinations.
1
Select “Destinations: ###”.
(###: Number of selected addresses)
2
Select the desired field button, and
confirm destinations.
z To delete a destination, select a destination,
and then select “Delete” and “Yes”.
3
Select “OK”.