Panasonic Laser Fax UF-6000 - Manual (Page 34)

34
Chapter 2 Basic Fax Transmission
Setting the Original Size
The original’s size is usually detected automatically when an original is placed on the Platen Glass.
If the size is not detected automatically, or you would like to change the detected size, you can set the
Original Size manually by following the procedure below.
z This feature is not available when the original is loaded on the ADF.
1
Place an original on the Platen Glass.
z Refer to Placing Originals (Facsimile/
Internet Fax) in the Operating Instructions
(For Basic Operations) of provided booklet.
2
Press the Fax key.
3
Select “Basic Menu”.
4
Select “Original Size”.
Original size is not
detected correctly.
Detected Size
Original size is not detected
automatically.
Icon of the original
is not displayed.
Face down. Align with the top
left corner. Close ADF.