Panasonic 150P - Manual (Page 63)

63
Troubleshooting
Starting with:
NOTE
If the printing operation fails, check the following points first:
The printer cable is properly connected.
Length of the printer cable is not longer than 6 ft. (2 m).
Power to the device is turned on.
Paper is loaded on the device properly.
Error message is not displayed on device.
The above points can be verified by printing a test page. Refer to the following for procedures for test
page printing:
Windows 95/98/Me [General Tab] (See page 14)
Windows NT 4.0 [General Tab] (See page 27)
Windows 2000 [General Tab] (See apge 46)
The status of the devices can be verified by the status monitor.