Storage, Replacement, Environment – Philips HD4686 User Manual

Page 11: Guarantee and service, Troubleshooting

Advertising
background image

4

Empty the kettle and rinse the inside thoroughly.

5

Fill the kettle with fresh water and boil the water.

6

Empty the kettle and rinse it with fresh water again.

7

Repeat the descaling procedure if there is still some scale in the kettle.

You can also use an appropriate descaler. In that case, follow the instructions on the package of the

descaler.

storage

- To store the cord, turn the cord winder in the bottom of the base clockwise (Fig. 17).

replacement

You can buy replacement filters for your kettle from your Philips dealer or a Philips service centre.

The table below indicates which filters are suitable for your electric kettle.

Kettle type

Filter type

HD4685: 2400W, 1.0 litre

8824 990 00000

HD4686: 2400W, 1.5 litres

8824 991 00000

Environment

- Do not throw away the appliance with the normal household waste at the end of its life, but

hand it in at an official collection point for recycling. By doing this, you help to preserve the

environment (Fig. 18).

guarantee and service

If you need service or information or if you have a problem, please visit the Philips website at

www.philips.com or contact the Philips Consumer Care Centre in your country (you find its phone

number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country,

go to your local Philips dealer.

troubleshooting

Signal

Meaning/solution

One temperature light lights up

continuously while the light rings

around the KEEP WARM button

and the on/off button are off.

After the water has reached the set temperature, the light of

the set temperature stays on for 120 seconds.

Two or more temperature lights

flash rapidly at the same time.

The water in the kettle has become more than 10°C hotter

than the set temperature because:
- there is too little water in the kettle. To prevent

overheating, always fill the kettle with at least 0.5 litres water.
- there is too much scale in the kettle. Descale the kettle

before you use it again (see chapter ‘Cleaning and descaling’).

Two temperature lights flash

alternately.

The kettle is out of order. Contact an authorised Philips

service centre or the Consumer Care Centre in your

country.

EnglisH

11

Advertising
This manual is related to the following products: