Panasonic KV-S2026CU - Manual (Page 16)

Component Identification
16
∫ About the SCSI setting
When connecting the scanner to a SCSI chain using a SCSI cable, perform the SCSI ID setting correctly.
The scanner is provided with a DIP switch for the SCSI ID No. setting and the terminator setting.
SCSI ID Setting
SCSI Terminator Setting
ID No.
Switch
Remarks
#2 #1 #0
0 OFF OFF OFF
1 OFF OFF ON
2 OFF ON OFF
3 OFF ON ON
4 ON OFF OFF
5 ON OFF ON
6 ON ON OFF Default setting
7 ON ON ON
Function Switch Description
Enable ON ≥ The last device in the SCSI chain
≥ Default setting
Disable OFF Not the last device in the SCSI chain