Panasonic CT-27G6 - Manual (Page 6)

6
I NSTALLATION
Cable / Antenna
For proper reception, either a cable or antenna connection is
required.
Cable Connection
Connect the cable supplied by your local
cable company.
Note: A cable converter box may be required for
proper reception. Check with your local
cable company for compatibility
requirements.
Antenna Connection
• For proper reception of VHF/UHF channels, an external
antenna is required. For best reception an outdoor antenna
is recommended.
• Antenna Mode must be set to TV.
Note: Cable Mode is preset at the factory.
Antenna users must change to TV Mode
in the SETUP Menu.
Optional Equipment Connections
Procedure
1. Connect equipment as shown to front or rear Audio/Video
input jacks.
Note: Front and rear Audio/Video connectors cannot be
operated at the same time (some models).
2. Select the Video mode by pressing TV/VIDEO button.
3. Operate optional equipment as instructed in equipment
manual.
75 Ohm VHF/UHF
on back of TV
Incoming Cable from
Cable Company
Incoming Cable from
Home Antenna
CABLES NOT INCLUDED
TERMINALS ON BACK OF TV
VCR
L
R
ANT IN
VIDEO OUT
AUDIO OUT
ANT OUT
Jack used for 1/8"
headohone plug
H P J VIDEO 1 L AUDIO IN R
INPUT
R
AUDIO
L
TO AUDIO
AMP
2
VIDEO
S-VIDEO 1
TERMINALS ON FRONT OF TELEVISION
(some models)