Patton electronic PATTON 2603 - Manual (Page 119)

General Characteristics 119
Models 2603, 2621, and 2635 Getting Started Guide B • Specifications
General Characteristics
• Compact low-cost router/bridge
• 10/100 Ethernet
• Unlimited host support.
• Comprehensive hardware diagnostics, works with any operating system, easy maintenance and effortless
installation.
• Built-in web configuration.
• Setup allows for standard IP address and unique method for entering an IP address and mask WITHOUT
use of a console connection. Default IP address of 192.168.200.10/24.
• Simple software upgrade using FTP into FLASH memory.
• Front panel LEDs indicate Power, WAN, Ethernet LAN speed and status.
• Field Factory Default Option.
• Standard 1 year warranty.
Ethernet
• Auto-sensing Full-Duplex 10Base-T/100Base-TX Ethernet.
• Standard RJ-45 and built-in MDI-X cross-over switch.
• IEEE 8021.d transparent learning bridge up to 1,024 addresses.
• 8 IP address/subnets on Ethernet interface.
Sync Serial Interface
• ITU-T X.21 or V.35 interface
• Available with female DB-25 and DB-15 connectors
• User configurable DTE/DCE for X.21
T1/E1 Interface
• Line Rate 1.544 Mbps (T1), and 2.048 Mbps (E1)
• RJ-48C connector ( also includes dual BNC for E1 connections)
• DSX-1 levels for connection to local T1/E1 device (PBX).
• Nx56/64 kbps with full DS0 mapping
• AMI/B8ZS (T1), AMI/HDB3 (E1)
• ESF coding and framing (T1)