9 advanced settings, 1 change master pin, 2 registration – Philips CD1551B User Manual
Page 34: 3 unregister, 9advanced settings
32
Advanced settings
9
Advanced settings
9.1
Change Master PIN
The Master PIN is used for accessing the
answering machine remotely. The default
Master PIN number is 0000. The
maximum length of the Master PIN is 8
digits. This PIN is also used to protect the
settings of your handset. Your handset
will prompt you whenever the PIN is
required.
Note
The default pin code is preset to 0000. If
you change this PIN code, keep the PIN
details in a safe place where you have easy
access to them. Do not lose the PIN
code.
Press
m
key in idle mode, scroll
:
to
ADVANCED SET
and press
<
OK
, scroll
:
to
CHANGE PIN
and press
<
OK
.
Enter the Master PIN when
prompted and press
<
OK
to
confirm.
• The PIN entered will be shown as
asterisks (*) on the screen.
Enter the new PIN and press
<
OK
to confirm.
• A validation tone is emitted and the
screen returns to previous menu.
Tip
If you forget your PIN, you will need to
reset your phone to its default settings.
See “Reset unit” on chapter 9.4 for more
details.
9.2
Registration
The procedures described below are the
procedures that you will find in your
handset. The procedures may vary
according to the handset you want to
register. In this case, please refer to the
manufacturer of the additional handset.
Additional handsets must be registered to
the base unit before you can use them. Up
to 4 handsets can be registered to one
base station.
Insert battery to power up the
handset. The LCD displays "
PRESS
OK KEY TO REGISTER
".
Press
<
OK
on handset, the LCD
displays "
HOLD LOCATOR KEY
DURING 5s
".
Within 5 minutes, press the locator
key on base station to start
registration.
If registration succeeds, the handset
returns to idle mode.
If registration fails, the LCD will
display "
PRESS OK KEY TO
REGISTER
". Repeat the process
again.
9.3
Unregister
Press
m
key in idle mode, scroll
:
to
ADVANCED SET
and press
<
OK
, scroll
:
to
UNREGISTER
and press
<
OK
.
Scroll
:
to select the handset
number to unregister and press
<
OK
.
• A validation tone is emitted to indicate
successful unregistration and the
screen return to previous menu.
1
2
3
1
2
3
4
5
1
2
cd155_ifu_master_en_us.book Page 32 Wednesday, May 21, 2008 4:35 PM