Advanced operation, Tape operation, Program end search – Panasonic PVQ-2012 User Manual

Page 22: Index search, Search system is

Advertising
background image

22

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

Search System is ...

Each time a recording is made, an invisible index mark is placed on the tape.
When timer recordings are made, program index and information are also included.
These index marks can be used to access or scan recordings.

Tape Operation

Program End Search

1

Example of Program End Search operation.

Fig.1

Fig.2

Fig.3

If search exceeds a few seconds in BLANK area.

Program 2

BLANK

Program 1

INDEX

Press SEARCH button

FF

2

Press SEARCH button

1

Press SEARCH in
Playback or Stop
mode to display
INDEX SEARCH
screen.

Index Search

Go directly to the desired recording.

2

Press number
keys
to select the
recording number.

• To calculate number,

see below.

3

Press FF or REW
to start search.

• Play begins at search

end. To search
forward or back 1
index, press FF or
REW while screen left
in displayed (10
seconds).

• Make each entry within 10 seconds, or the Index

Search mode will be canceled.

• If Index Search is started very close to an index

mark, that index mark may not be counted in the
search.

Notes

NOTE: indicates start points of each recording.

To calculate the Index Number

Example 1:

To go to rec. 2 from rec. 4, enter 3 and press REW.

Example 2:

To go to rec. 6 from rec. 2, enter 4 and press FF.

6

1

5

7

2

3

4

1

7

5

3

4

6

2

Press SEARCH twice in Playback
or Stop mode to display
PROGRAM END SEARCH screen
.

Press FF to
start search.

Upon locating end point...
The unit searches slightly past end point,
reverse searches, and plays the last few
seconds of the program, then stops.

• If Program End Search is started very

close to an index mark, that mark may be
skipped over.

• To cancel, press PLAY or STOP.

Locates end point of recording for continuity.

End Point

Notes

PLAYBACK DIRECTION

Program 1

Program 2 or BLANK

INDEX

Press SEARCH button

FF

End Point

Program 2

BLANK

INDEX

BLANK

Program 1

Press SEARCH button

FF

End Point

ENTER I NDEX NUMBER : 1

US I NG 1- 9 KEYS

FORWARD SEARCH

:

FF

REVERSE SEARCH

:

REW

NEXT

:

SEARCH

EX I T

:

STOP

I NDEX SEARCH

I NDEX SEARCH 3

I NDEX SEARCH

FORWARD SEARCH

:

FF

REVERSE SEARCH

:

REW

I NDEX SEARCH

SEARCH START

:

FF

EX I T

:

SEARCH

PROGRAM END SEARCH

Advertising
This manual is related to the following products: