Panasonic SC-BTT370 - Manual (Page 16)

16
VQT3D27
∫
[BTT770] [BTT370]
When the connecting devices have an HDMI terminal
A HDMI cable (not supplied)
B Set Top Box (Cable/Satellite), etc.
C Other devices (Video game, etc.)
≥ Make sure that the HDMI cable connection is made to enjoy
the videos from the Set Top Box, etc. Futhermore, select
“HDMI Input1” or “HDMI Input2” as a source.
HDMI Standby Pass-Through ( 39)
Even if this unit is in standby mode, a device connected with
this unit can output videos and sound to the TV.
Moreover, you can switch the HDMI input terminal by pressing
[EXT-IN] on the remote control.
≥ Sound will not be output from this unit's speakers.
∫ When the connecting devices do not have an HDMI terminal
A Refer to the operating instructions of the
respective devices for the optimal connections.
B Optical digital audio cable (not supplied)
C Set Top Box (Cable/Satellite), etc.
Connection with Set Top Box, etc.
AV IN
(ARC)
AV OUT AV OUT


 

HDMI IN 2
HDMI IN 1(CABLE/SAT)
HDMI AV OUT
(ARC)
TV
e.g.,
OPTICAL
OUT



OPTICAL
TV
e.g., To enjoy TV audio from this home theater
system’s speakers:
1 Connect the STB and the main unit with the
Optical digital audio cable (not supplied).
2 Select “DIGITAL IN” or “D-IN” as a source
( 23).
Radio antenna connection
∫ Using an indoor antenna ∫ Using an outdoor antenna
Use outdoor antenna if FM radio reception is poor.
A FM indoor antenna (supplied)
B Adhesive tape
Affix this end of the antenna where reception is best.
A FM outdoor antenna [Using a TV antenna (not
supplied)]
The antenna should be installed by a competent
technician.
B 75 ≠ coaxial cable (not supplied)
C Antenna plug (not supplied)


FM ANT
75Ω
Main unit



FM ANT
75Ω
e.g.,
Main unit
SC-BTT770_370_270P_eng.book 16 ページ ２０１０年１２月１６日 木曜日 午後９時５１分