Panasonic SC-BTT370 - Manual (Page 18)

18
VQT3D27
STEP 4: AC power supply cord connection
Connect only after all other connections are complete.
A AC power supply cord (supplied)
B To a household AC outlet A AC power supply cord (supplied)
B To a household AC outlet
Main unit
This unit consumes a small amount of AC power, even when it is turned off.
[BTT770] [BTT370] : approx. 0.05 W*, [BTT270] [BTT273]: approx. 0.4 W*
* When the “Quick Start” setting is “Off”
In the interest of power conservation, if you will not be using this unit for a long time, unplug it from the household AC outlet.
Wireless system [BTT770]: approx. 0.2 W
STEP 5:
[BTT770]
Preparing the wireless system
Turn on the wireless system after all connections are complete.
AC IN




Main unit
[BTT770]
Wireless System
≥ AC power supply cord
with a ferrite core is for the
wireless system. Do not
use any other AC power
supply cord except the
supplied one.
Install this unit so that the power cord can be unplugged from the socket outlet immediately if any problem occurs.
WIRELESS LINK POWER
WIRELESS LINK indicator
Red:
The wireless system is on and the wireless link is deactivated.
Green : The wireless system is on and the wireless link is activated.
(“WIRELESS SPEAKERS LINKED” is also displayed on the main unit’s
display by pressing and holding [STATUS] on the remote control.)
Press [ POWER C I, B Í] on the wireless system.
Unit on/off button [POWER C I, B Í]
C I: The wireless system is on.
B Í: The wireless system is off.
Wireless System
VQT3D27~Body_mst.fm 18 ページ ２０１１年１月６日 木曜日 午後１時３６分