Panasonic SC-BTT370 - Manual (Page 27)

Playback
27
VQT3D27
Enjoying 3D video
You can enjoy powerful 3D videos with realistic sensations by
connecting this unit with a High Speed HDMI Cable to a 3D
compatible TV.
Preparation
Connect 3D compatible TV to an HDMI AV OUT terminal of
this unit using a High Speed HDMI Cable and select HDMI
video input mode on the TV. (
14, 15)
≥ Perform the necessary preparations for the TV.
Method of playback is the same as normal disc playback.
(
25)
≥ Playback following the instructions displayed on the screen.
Perform the following settings as necessary.
1
While playing,
Press [SUB MENU].
2
Press [3, 4] to select “3D Settings” and
press [OK].
3
Select an item, then press [OK].
≥ Depending on the contents, displayed items are different.
≥ Please refrain from viewing 3D images if you do not feel well or are
experiencing visual fatigue.
In the event that you experience dizziness, nausea, or other discomfort
while viewing 3D images, discontinue use and rest your eyes.
≥ Depending on the connected TV, the video being played back might switch
to 2D video due to changes in resolution etc. Check the 3D setting on the
TV.
≥ 3D images may not output as settings of “HDMI Resolution” and “24p
Output”. ( 39)
3D settings
3D BD-Video
Playback It is also possible to play back 3D discs
in 2D (conventional video). (
37)
3D Type If 3D video cannot be played back in
3D, change the settings as required by
the connected TV format. (
39)
≥ Change the settings for 3D on the TV
also when “Checker board” or “Side
by side” is selected.
3D Playback
Precautions Hide the 3D viewing warning screen.
(
39)
Pop-Out Level Adjust the pop-up position for the
Playback menu or message screen etc.
(
36)
The illustration is an image.
Useful functions
Signal
Format Original Keep original picture
format.
Side by side 3D picture format
comprising of left and right
screens.
2D to 3D Converts 2D pictures to 3D
effect.
3D
Picture
Mode Normal Playback pictures with
normal 3D effects.
Soft You can enjoy 3D pictures
with a feeling of
broadness, holding back
the depth perception.
Manual
Settings Set 3D effect manually.
Distance
Set the amount of depth
perception.
Screen Type
Selects how the screen
appears during 3D
playback (flat or round).
Frame Width
Set the amount of
feathering at the edge of
screen.
Frame Color
Set the color of feathering
at the edge of screen.
SC-BTT770_370_270P_eng.book 27 ページ ２０１０年１２月１６日 木曜日 午後９時５１分