Panasonic SC-BTT370 - Manual (Page 7)

Getting s
tar
te
d
7
VQT3D27
1 Standby/on switch (POWER Í/I) (> 19)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
2 Open or close the disc tray (> 22)
3 Adjust the volume of the main unit
4 Disc tray
5 Stop (> 25)
6 Start play (> 25)
7 SD card slot (> 22)
8 Remote control signal sensor
Distance: Within approx. 7 m (23 ft.)
Angle: Approx. 20
o up and down, 30o left and right
9 Display
10 Connect iPod/iPhone (> 32)
1 AC IN terminal (> 18)
2 Speaker terminals (> 13)
3 Cooling fan
4 [BTT770] [BTT370] USB port for the Communication Camera
TY-CC10W (optional) (> 34)
5 LAN port (> 17)
6 HDMI AV OUT (ARC) terminal (> 15)
7 [BTT770] [BTT370] HDMI 1 IN (CABLE/SAT) terminal (> 16)
8 [BTT770] [BTT370] HDMI 2 IN terminal (> 16)
9 FM radio antenna terminal (> 16)
10 DIGITAL AUDIO IN terminal (> 14 , 15)
11 AUX terminal (> 14)
12 VIDEO OUT terminal (> 14)
13 [BTT770] Digital transmitter dock for supplied wireless
system (> 17)
[BTT370] Digital transmitter dock for optional wireless
system (> 12)
Main unit (Front)
SD CARD
iPod
VOL POWER OPEN/CLOSE
1 2 3
4 5 7 6 10 8 9
Pull open.
POWER-SAVING FEATURES
The main unit is designed to conserve its power consumption and save energy.
[BTT770] [BTT370] Wireless system (SH-FX71) does not have this function.
≥ Automatic power-down function
The main unit will automatically switch to standby mode after
30 minutes if the main unit is inactive as follows.
e.g.
jThere is no audio signal from an external device.
jDisc playback is stopped/paused.
jiPod/iPhone playback is stopped/paused.
jThe disc menu is displayed and play is not selected.
(This function may not work depending on the application
type of discs.)
Main unit (Rear)
SUBWOOFER
3
6 5 2 1 4 3
3 3 R L R L Ω Ω Ω Ω 3
CENTER SURROUND FRONT LAN AUX FM ANT
Ω 75
COMMUNICATION
CAMERA
1 2 3 4 5 6 7 13 11 12 8 9 10
VQT3D27~Body_mst.fm 7 ページ ２０１１年１月５日 水曜日 午前１１時１４分