Panasonic KX-FPG377 - Manual (Page 34)

3. Telephone
32
3.2.2 Using the base unit
1 Press {DIGITAL SP-PHONE} and talk into
the microphone.
2 When finished talking, press {DIGITAL SP-
PHONE}.
3.3 Intercom
L Keep the front cover page open for button
locations.
3.3.1 Paging the base unit from
the handset
1 Handset:
Press {INTERCOM}.
L The base unit will beep. You can then talk
with the base unit user.
2 Base unit:
Answer through the microphone.
3 Handset:
When finished talking, press {OFF} or place
the handset on the base unit.
Base unit:
When finished talking, press
{
LOCATOR/INTERCOM}.
Note:
L If the handset user has difficulty hearing the
base unit user, ask the base unit user to
decrease the speaker volume by pressing
{B}
.
3.3.2 Paging the handset from
the base unit
1 Base unit:
Press {LOCATOR/INTERCOM}.
L The base unit will page the handset for
about 1 minute.
L To stop paging, press
{
LOCATOR/INTERCOM} again.
2 Handset:
Press {INTERCOM} to answer.
3 Base unit:
Speak into the microphone.
4 Base unit:
When finished talking, press
{
LOCATOR/INTERCOM}.
Handset:
When finished talking, press {OFF} or place
the handset on the base unit.
Handset locator
Using this feature, you can locate the handset if
it has been misplaced.
{ DIGITAL SP-PHONE}
Microphone
FPG376.book Page 32 Wednesday, July 30, 2003 6:28 PM