Incoming messages, 3 listening to recorded messages, Listening to recorded messages – Panasonic KX-FPG377 User Manual

Page 54: 3 listening to recorded messages, 1 erasing recorded messages, Answering machine 52, Flash/light

Advertising
background image

7. Answering Machine

52

Incoming Messages

7.3 Listening to recorded
messages

The base unit display will show the total number
of recorded messages.

When the unit has recorded new voice
messages:

The {AUTO ANSWER} indicator will flash
when AUTO ANSWER is turned ON.

The total number of recorded messages will
flash on the base unit display.

The unit will beep slowly if the message alert
feature is activated (feature #42, page 63).

Press {PLAY MESSAGES}.

L

Only new messages will be played.

L

Adjust the speaker volume using {A} or {B}.

L

After playing back all of the new messages,
the {AUTO ANSWER} indicator will stop
flashing but will remain lit up when AUTO

ANSWER is turned ON. If you press {PLAY
MESSAGES
} at this time, all the recorded
messages will be played.

Note:

L

The total recording time of all messages
(greeting, incoming and memo) is about 18
minutes
. If messages are recorded in noisy
rooms, the time may be shortened.

To repeat a message
Press {<} while listening to the message.

L

If you press {<} within 5 seconds of the
beginning of the message, the previous
message will be played.

L

To play back a specific message, press {<}
or {>} and search for the message you want
to listen to.

To skip a message
Press {>} to play the next message.

To stop playback temporarily
Press {STOP}.

L

If you press {PLAY MESSAGES} within 1
minute, the unit will resume playing the rest of
the messages.

Voice time/day stamp
During playback, a synthesized voice will
announce the day of the week and time that each
message was recorded.

To change the playback speed
Press {QUICK} to play messages at one and a
half times the original speed. Press {SLOW} to
play messages at half the original speed.

L

To return to the original speed, press either
{

QUICK} or {SLOW} again during quick or

slow playback.

7.3.1 Erasing recorded
messages

To erase a specific message
Press {ERASE} while listening to the message
you want to erase.

To erase all the messages

1. Press {ERASE}.

2. Press {SET}.

3. Press {SET} again.

L

Messages recorded in the voice mailbox will
not be erased.

Example:

02

Example:

02

{

STOP}

{

QUICK}

{<}{>}{A}{B}

{

SET}

{

ERASE}

{

SLOW}

{

PLAY MESSAGES}

Flash/Light

FPG376.book Page 52 Wednesday, July 30, 2003 6:28 PM

Advertising
This manual is related to the following products: