Panasonic KX-FPG377 - Manual (Page 81)

10. Caller IQ Feature
79 For assistance, please call openLCR: 1-866-openLCR (1-866-673-6527)
10 Caller IQ Feature 10For assistance, please call openLCR: 1-866-openLCR (1-866-673-6527) Caller IQ Feature
10.1 openLCR service for
the Caller IQ feature
This unit is compatible with service provided by
openLCR.
L If you have any questions regarding the
openLCR service, call openLCR’s
customer service department at 1-866-
openLCR (1-866-673-6527).
L NEITHER PANASONIC
COMMUNICATIONS CO., LTD. (PCC) NOR
MATSUSHITA ELECTRIC CORPORATION
OF AMERICA (MECA) IS IN ANY WAY
AFFILIATED WITH, OR RESPONSIBLE
FOR THE ACTS OR OMISSIONS OF,
OPENLCR.COM, INC. (OPENLCR).
NEITHER PCC NOR MECA NOR ANY OF
THEIR EMPLOYEES OR AFFILIATES OR
CUSTOMERS MAKE ANY WARRANTIES
OR REPRESENTATIONS, EITHER
EXPRESS OR IMPLIED, TO ANY
CUSTOMER OR ANY OTHER THIRD
PARTY WITH RESPECT TO ANY OF THE
SERVICES PROVIDED BY OPENLCR,
NOR ASSUME NOR CREATE ANY OTHER
OBLIGATION OF ANY KIND ON BEHALF
OF OPENLCR.
L If you subscribe to openLCR service, the unit
will start the first download of the rate table to
your fax machine and the Caller IQ feature
will be automatically turned ON. The
{
CALLER IQ} indicator will stay on. No
special dialing or button pressing is
necessary to place a long distance call with
the Caller IQ feature.
If you do not wish to use the Caller IQ feature,
you can turn it OFF temporarily.
Note:
L Before subscribing to openLCR service, you
cannot change the following settings.
10.2 To turn the Caller IQ
ON / OFF
10.2.1 Using the handset
1 Press {CALLER IQ}.
2 Press {0}.
3 To turn ON:
Press {1}.
To turn OFF:
Press {3}.
4 To turn ON:
Press {*}.
To turn OFF:
Press {#}.
L A beep will sound.
L If 3 beeps sound, Caller IQ is not set
properly. Start again from step 1.
L If you do not press any buttons for 1
minute or you press {OFF}, the handset
will exit the programming mode.
10.2.2 Using the base unit
1 Press {CALLER IQ}.
{ CALLER IQ}
{ OFF}
Flash/Light/Off
{ SET}
FPG376.book Page 79 Wednesday, July 30, 2003 6:28 PM