Operations, General – Panasonic KX-FPC165 User Manual

Page 91

Advertising
background image

91

Operations

For fax advantage assistance, call 1-800-435-7329.

When a function does not work, check here
before requesting help

!

General

Problem

I cannot make and receive
calls.

I cannot make calls.

The unit does not work.

The unit does not ring.

The unit displays the following
though the paper is inserted.

The other party complains
they only hear a fax tone and
cannot talk.

The

button

does not function properly.

The receive mode does not
function properly.

During programming, I cannot
enter the code, ID number or
password.

The ink film runs out quickly.

The unit beeps.

REDIAL/PAUSE

CHECK PAPER

●

The power cord or telephone line cord is not connected.
Check the connections (p. 16).

●

If you used a splitter to connect the unit, remove the
splitter and connect the unit to the wall jack directly. If the
unit operates properly, check the splitter.

●

The dialing mode setting is wrong. Change the setting of
feature #13 (p. 81).

●

Disconnect the unit from the telephone line and connect
the line to a known working telephone. If the working
telephone operates properly, contact our service personnel
to have the unit repaired. If the working telephone does
not operate properly, contact your telephone company.

●

The ringer volume is set to off. Adjust it (p. 23, 24).

●

The ring setting of feature #06 is set to “RINGER OFF”.
Change to another ring setting (p. 80).

●

The paper is inserted halfway. Insert it correctly (p. 15)
and press

to clear the message.

●

FAX ONLY mode is set. Tell the other party the number is
only used for faxes.

●

Change to TAD/FAX mode (p. 62), TEL mode (p. 52) or
TEL/FAX mode (p. 54).

●

If you use a distinctive ring service, turn AUTO ANSWER
off so that the fax machine is in TEL mode.

●

If you use a distinctive ring service, make sure you have
set the same ring pattern assigned by the telephone
company (p. 58).

●

If this button is pressed during dialing, a pause will be
inserted. If pressed immediately after a dial tone is
obtained, the last number dialed will be redialed.

●

A Distinctive Ring pattern of feature #31 is set (p. 58).

●

TEL/FAX mode is set (p. 54, 55).

●

All or part of the numbers are the same. Change the
number: feature #11 (p. 81), #41 (p. 84), #51 and #52
(p. 85).

●

The HELP printing function, copy function, and reports
also use ink film.

●

Recording paper or ink film has run out. Press

to

stop the beeps and install paper/ink film.

STOP

SET

Cause & solution

(continued)

Advertising
This manual is related to the following products: