Panasonic CW-XC120HU - Manual (Page 5)

5
About
the
Controls
on
the
Air
Conditioner
About the Controls on the Air Conditioner
Controls
Models:CW-XC100HU
CW-XC120HU
2
1
6
4
3
5
OPERATION
• To turn the air conditioner ON, push the
OFF/ON button.
To turn the air conditioner OFF, push the
button again.
• This button takes priority over any other
buttons.
• When you first turn it on, the air conditioner is
on the High cool mode and the temp. at 72°F
(22°C).
MODE
• Every time you push this button, it will toggle
between COOL, FAN and DRY.
ON/OFF TIMER
• Every time you push the TIMER button, timer
is set as follows. (1Hour → 2Hours → 3Hours
→ 4Hours → 5Hours 6Hours → 7Hours →
8Hours → 9Hours → 10Hours 11Hours →
12Hours → 0)
• The Setting Temperature will be raised by 2°F
(1˚C) 30 min. later and by 2°F (1˚C) after
another 30 min.
FAN SPEED
• Every time you push this button it is set as
follows. {High(F3) → Low(F1) → Med(F2) →
High(F3)...}.
TEMPERATURE SETTING
• This button can automatically control the
temperature of the room. The temperature
can be set within a range of 60°F to 86°F by
1°F(16˚C to 30˚C by 1˚C). Select the lower
number for lower temperature of the room.
REMOTE CONTROL SIGNAL RECEIVER
DRY
• When this unit is in dry mode, the fan rotates
in low speed. The fan stops when the
compressor stops cooling.
Approximately every 3 minutes the fan will
turn on and the unit checks the room air
temperature to set itself.