PLUS Vision PLUS V-1080 - Manual (Page 52)

E-52
Filter
This function sets the sharpness when the input signal is
adjusted to the resolution of the projector and enlarged or
reduced.
Select the item name "Filter" and select the setting contents with
the cursor (
ᮤ ᮣ
) buttons.
Smaller numerical values result in a sharper picture and larger
values result in a softer picture. Please select your desired setting
value.
Aspect
Filter
Projection
Auto
3
Keystone
Picture in Picture
View
Projection
This function selects the projection orientation to the
screen. It is set when the projector projects to the front or
the rear of the screen.
1. Select item name "Projection" and press the cursor (
ᮣ
) but-
ton. The sub menu will open.
2. Select "Vertical Flip" or "Horizontal Flip" with the cursor ( ▲▼ )
buttons and set to "On" or "Off" with the cursor (
ᮤ ᮣ
) but-
tons (or with the main unit ( ) button).
"Vertical Flip" Off
"Horizontal Flip" Off "Vertical Flip" Off
"Horizontal Flip" On "Vertical Flip" On
"Horizontal Flip" On "Vertical Flip" On
"Horizontal Flip" Off
Aspect
Filter
Projection
Auto
3
Keystone
Aspect
Filter
Projection
Auto
3
Keystone
Vertical Flip Off
Horizontal Flip Off