Connecting the phone to the network, Connecting the phone to the network –3 – Polycom VVX 1500 D User Manual
Page 13
Setting Up the Polycom VVX 1500 D Phone
2 - 3
c
Change the phone’s configuration to use the Polycom CMA system for
provisioning. Refer to
Enabling Provisioning Using a Polycom CMA
on page
Once the VVX 1500 D phone is provisioned by a Polycom CMA system,
future phone software upgrades are managed by the Polycom CMA
system as well.
Refer to
Deploying the Phones Using a Polycom CMA System
on page
.
For more information on configuring the Polycom VVX 1500 D phone, refer to
the latest Administrator’s Guide for the Polycom UC Software, which is available
at
Connecting the Phone to the Network
The following figure shows how to connect the phone to the network.
Note
You can also set up the VVX 1500 D phone in a “hybrid” system where the VVx
1500 phones can be provisioned by both a Polycom CMA system and a
provisioning server. In this scenario, you should review the configuration
parameters mentioned in
on page
Note
Connecting the Polycom VVX 1500 D phone to the network is optional, but highly
recommended (for the reasons discussed at the beginning of this chapter).
2
3
1