Philips GOGEAR SA080308 - Manual (Page 28)

28 EN
14 Update SA080
SA080 is controlled by an internal program
called firmware. Newer versions of the
firmware may have been released after you
have purchased SA080.
The software program called Philips Device
Manager can use your computer to check for
firmware updates that are available on the
Internet.
Install Philips Device Manager on your
computer from SA080 or download the latest
version from www.philips.com/support.
Note
Your music files are not affected by a firmware •
update.
Manually verify/ update
firmware
1
Ensure that your computer is connected
to the Internet.
2
Connect SA080 to the computer.
3
On your computer, click Start >
Programs > Philips > Philips MP3 player
> GoGear SA080 Device Manager to
launch Philips Device Manager.
4
Click Update.
» Philips SA080 Device Manager checks
for updates and installs new firmware
from the Internet, if available.
5
When the display shows Update
completed, click OK.
6
Disconnect SA080 from the computer.
» SA080 restarts after the firmware is
updated and is ready for use again.
EN