Panasonic PV C2062 - Manual (Page 13)

13
Basic Operation
umber keys
ottom of next page.
Copy Your Tapes (Dubbing)
• Unauthorized exchanging
and/or copying of copyrighted
recordings may be copyright
infringement.
Connections you’ll need to make.
Playback (Source)
1
Recording (Editing) unit
Insert pre-
recorded tape. Insert blank tape with
record tab.
• Dubbing tapes protected
with Copy Guard will have
poor quality results.
2
3
4
5
Press PLAY then
PAUSE at starting
point to put in
Standby mode.
Press PLAY
to start dubbing.
Press STOP
to stop dubbing.
Select “LINE” mode.
See “Selecting Input Mode” below.
Press REC, then
PAUSE/SLOW
immediately to put in
Standby mode.
Press PAUSE/SLOW
to start dubbing.
Press STOP
to stop dubbing.
Selecting Input Mode
Method 1:
Press CH
. The display will change as follows.
Method 2:
a Press ACTION for MAIN MENU.
b Press
to select “TV”, then press
ACTION for SET UP TV screen.
c Press to select “INPUT SELECT,” and
then press to select “TUNER” or “LINE.”
d Press ACTION twice to exit this mode.
Caution
AUDIO IN
Recording (Editing) unit
OUT
IN
IN FROM ANT.
OUT TO TV
AUDIO
VIDEO IN
Playing (Source) VCR
VIDEO
AUDIO IN
(Perform operation of steps 4 and 5 on both units at same time.)
STOP
1 2 3
125 LINE
(CABLE)
69
(TV)
or
Our Vacation
*Important: If a remote control button does not work when pressed, press the COMBO button
on the remote and try the button again.
LSQT0582A_P10-21.p65 12/14/2001, 2:04 PM 13