Advanced operation, Tape operation, Program end search – Panasonic PV C2062 User Manual

Page 24: Index search, Search system is

Advertising
background image

24

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

Search System is ...

Each time a recording is made, an invisible index mark is placed on the tape.
When timer recordings are made, program index and information are also included.
These index marks can be used to access or scan recordings.

Tape Operation

Program End Search

1

SEARCH START

:

FF

EX I T

:

SEARCH

PROGRAM END SEARCH

Example of Program End Search operation.

Fig.1

Fig.2

Fig.3

If search exceeds a few seconds in BLANK area.

Program 2

BLANK

Program 1

INDEX

Press SEARCH button

FF

2

Press SEARCH button

Index Search

Go directly to the desired recording.

• Make each entry within 10 seconds, or the Index

Search mode will be canceled.

• If Index Search is started very close to an index

mark, that index mark may not be counted in the
search.

Notes

NOTE: indicates start points of each recording.

To calculate the Index Number

Example 1:

To go to rec. 2 from rec. 4, enter 3 and press REW.

Example 2:

To go to rec. 6 from rec. 2, enter 4 and press FF.

6

1

5

7

2

3

4

1

7

5

3

4

6

2

Press SEARCH twice in Playback
or Stop mode to display
PROGRAM END SEARCH screen
.

Press FF to
start search.

Upon locating end point...
The unit searches slightly past end point,
reverse searches, and plays the last few
seconds of the program, then stops.

• If Program End Search is started very

close to an index mark, that mark may be
skipped over.

• To cancel, press PLAY or STOP.

Locates end point of recording for continuity.

End Point

Notes

PLAYBACK DIRECTION

Program 1

Program 2 or BLANK

INDEX

Press SEARCH button

FF

End Point

Program 2

BLANK

INDEX

BLANK

Program 1

Press SEARCH button

FF

End Point

1

Press SEARCH*
in Playback or
Stop mode to
display INDEX
SEARCH screen,
and then press
NUMBER Keys
to
select the
recording number.

To calculate number,

see below.

Press FF or REW
to start search.

Play begins at
search end. To
search forward or
back 1 index,
press FF or REW
while screen left in
displayed (10 sec.).

ENTER I NDEX NUMBER : 1

US I NG 1- 9 KEYS

FORWARD SEARCH

:

FF

REVERSE SEARCH

:

REW

NEXT

:

SEARCH

EX I T

:

STOP

I NDEX SEARCH

FORWARD SEARCH

:

FF

REVERSE SEARCH

:

REW

I NDEX SEARCH

2

LSQT0582A_P22-33.p65

12/14/2001, 1:52 PM

24

Advertising
This manual is related to the following products: