Panasonic PV C2062 - Manual (Page 6)

6 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Location of Controls
Remote Control Buttons (Light Tower™ Illuminated Remote Control)
• When LIGHT is pressed, available buttons in the selected mode light up and the selected mode button (COMBO
or DSSCABLE) flashes for 5 seconds. If no button is pressed, light goes out in 5 seconds to conserve batteries.
Also, by holding down a button, you can confirm the selected mode (mode button will flash) in the dark.
• When EJECT is pressed, the tape is ejected from Cassette Compartment.
If EJECT is pressed during recording, the unit will not respond to the command.
EJECT
Ejects tape.
POWER
Turn on or off the unit.
FM/TV
Receives FM radio signal.
MUTE
Mutes the sound instantly.
CHANNEL UP/DOWN
Selects a channel.
SELECT UP/DOWN
Control navigation around
on-screen menu.
ACTION
Displays Main Menu.
NUMBER Keys
Selects a channel directly.
PLAY
Begins playback.
REWIND/SEARCH
Rewinds tape, and searches
reverse scene.
PAUSE/SLOW
Pauses and slow motion
and frame advance picture.
SLEEP
Turns off the unit automatically.
AUDIO (For model PV-C2062 only)
Selects the desired auio mode.
CM SKIP/ZERO SEARCH
In Stop mode, goes to the
counter “0:00:00.“ In Play mode,
skips over 1 to 3 minutes of tape.
NITE
Color and picture intensity level are
adjusted during night time use.
SPEED
Selects recording speed.
STOP
Stops recording or playback.
COMBO
Returns to COMBO mode.
LIGHT
See below.
DSS/CABLE
Sets the remote to control some
basic DDS or Cable box
functions.
RAPID TUNE
Displays the last channel
you were watching.
VOLUME UP/DOWN
Adjusts volume.
SET/BACK SPACE
Sets a selected menu, or goes
back to correct.
PROGRAM
Displays SET PROGRAM screen.
You can set Timer Program and
On-Timer.
TRACKING UP/DOWN
Reduces picture noise during
Playback and Slow Motion.
ADD/DELETE
Adds or deletes a channel.
FAST FORWARDS/
SEARCH
Fast forwards tape, and searches
forward scene.
DISPLAY/ENTER
Displays the VCR status and
clock.
In DSS or CABLE mode, it may be
necessary after channel selection.
TAPE POSITION
Finds out present tape position
and amount of tape remaining.
REC
Records the program.
SEARCH
Goes directly to the desired
recording. Locates end point of
recording.
COUNTER RESET
Resets to “0:00:00” at
the desired position.
Notes
Model PV-C2062
remote shown.
LSQT0582A_P01-09.p65 12/14/2001, 1:05 PM 6