Panasonic DIGA DMR-EZ48V - Manual (Page 55)

55
RQT9056
Setup Menus
Set Channels Automatically
“Accessing the Setup Menu”
You will have to perform the following 3 steps for all other
operations on page 55−66.
With the unit stopped
,  to select “Other Functions”,
then
OK
,  to select “Setup”, then
OK
Tips
To return to the previous screen
Press [RETURN]. Even if you have changed an option, the change
is not activated until you press [OK].
To exit the screen
Press [RETURN] several times.
Notes
Changed settings remain intact even when switching the unit to
standby.
Perform steps 1−3 of “Accessing the Setup Menu” ( above).
,  to select “Channel” then 
,  to select “Set Channels
Automatically”, then OK
,  to select “Antenna” or
“Cable”, then OK
– When a TV (VIERA) supporting HDAVI
Control 3 is connected via an HDMI cable, the
following options will be displayed.
[Set Channels via VIERA Link] You can
acquire the VIERA setting information
[Set Channels without VIERA Link]
OK to complete.
Set Channels Manually
Perform steps 1−3 of “Accessing the Setup Menu” ( left).
,  to select “Channel”, then 
,  to select “Set Channels
Manually”, then OK
,  to select channel.
– You can also select channels with the
numbered buttons.
– You can also press [ ,] to skip several
lines.
Adding and Deleting Channels
After selecting a channel ( above, step 6).
 ,  to select the “Add/Del”
column.
,  to select “Added” or
“Deleted”.
– After selecting the “Channel” column with [ ,
], repeat steps 6–8 to set other channels.
Setting favorite channels
After selecting a channel ( above, step 6).
 ,  to select the “Favorite”
column, then
OK
,  to select the position on the
list, then OK
The channels are automatically set.
Select to suit the type of antenna you are using.
The captions you select or modify are used as channel names
and displayed on the Direct Navigator screen.
To add channels, delete undesired channels, or channels that
have poor reception.
You can defi ne a Favorite list.
RETURN
to complete.
– After selecting the “Channel” column with [ ,
], repeat steps 6–9 to set other channels.
Setting Men
us