Panasonic 2.4 GHz Digital Cordless Answering System KX-TG2631 - Manual (Page 20)

Making/Answering Calls
20 For assistance, please visit http://www.panasonic.com/phonehelp
Answering calls
When a call is being received, the ringer
indicator flashes rapidly.
1
Lift the handset and press {C} or {s}.
L You can also answer the call by
pressing any button except {^}, {V},
{<}
, {>}, or {OFF}. (Any key talk
feature)
2
When you finish talking, press {OFF}.
Note:
L
You can change the ringer tone. You can
also adjust the ringer volume (page 32).
Auto talk
This feature allows you to answer a call by
simply lifting the handset off the base unit
or charger. You do not need to press {C}.
To activate this feature, see page 31.
Temporary ringer off
While the handset is ringing for an outside
call, you can turn the ringer off temporarily
by pressing {OFF}.
Useful features during a
call
HOLD button
This feature allows you to put an outside
call on hold.
KX-TG2631
Press {HOLD} during an outside call.
L
To release the hold, press {C}.
Note:
L
If another phone is connected on the
same line (page 10), you can also take
the call by lifting its handset.
L
If a call is kept on hold for more than 6
minutes, an alarm tone starts to sound.
After 4 additional minutes on hold, the
call is disconnected.
KX-TG2632
1
Press {HOLD} during an outside call.
L
To transfer the call to another
handset, continue from step 2 on
page 41, “Transferring calls between
handsets, conference calls”.
2
Press {HOLD} again.
L
To release the hold, press {C}.
L
Another handset user can take the
call by pressing {C}.
Note:
L
If another phone is connected on the
same line (page 10), you can also take
the call by lifting its handset.
L
If a call is kept on hold for more than 6
minutes, an alarm tone starts to sound.
After 4 additional minutes on hold, the
call is disconnected.
TG2631_2632.book Page 20 Monday, December 26, 2005 2:02 PM