Panasonic 2.4 GHz Digital Cordless Answering System KX-TG2631 - Manual (Page 45)

Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp 45
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
*1 KX-TG2632
Display message Cause/solution
Busy L
The called base unit is in use.
L
Another handset or the called handset is in use. *1
L The handset you tried to copy phonebook items to is in
use.
*1
L The handset you are calling is too far from the base
unit.
*1
Error!! L The handset’s registration has failed. Move the handset
and base unit away from all electrical appliances and try
again.
L
Another handset user tried to send phonebook items to
you but there was an error. Have the other handset user
re-send the items to you (page 25).
*1
---Incomplete---
Phonebook full L The destination unit’s phonebook memory is full. Erase
unnecessary items from the destination unit’s
phonebook (page 24).
*1
Invalid L
There is no handset registered to the base unit
matching the extension number you entered.
*1
No items stored L Your phonebook or redial list is empty.
No link to base.
Move closer to
base, try again. L
The handset has lost communication with the base unit.
Move closer to the base unit, and try again.
L
Confirm that the base unit’s AC adaptor is plugged in.
L Raise the base unit antenna.
L
The handset’s registration may have been canceled.
Re-register the handset (page 42).
Phonebook full L
There is no space to store new items in the phonebook.
Erase unnecessary items (page 24).
Please lift up and
try again. L A handset button was pressed while the handset was
on the base unit or charger. Lift the handset and press
the button again.
System is busy.
Please try again
later. L
Other units are in use and the system is busy. Try again
later.
*1
L
Another user is listening to messages. Try again later.
TG2631_2632.book Page 45 Monday, December 26, 2005 2:02 PM