Panasonic HDMI TH-50PH20U - Manual (Page 8)

8
When using the Wall-hanging bracket (vertical)
Note:
When using the Wall-hanging bracket (vertical) (TY-WK42PV20), use the holes and to secure the
cables. If the clamper is used on the hole , the cables may be caught by the wall-hanging bracket.
1
2
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on
both the left and right sides.
Speaker
terminal (R)
Speaker
terminal (L)
When connecting the speakers, be sure to use only the optional accessory speakers.
Refer to the speaker’s Installation Manual for details on speaker installation.
AC cord connection (see page 13)
Speakers (Optional accessories)
AC cord fi xing
Unplug the AC cord
Unplug the AC cord pressing the
two knobs.
Note:
When disconnecting the AC cord, be
absolutely sure to disconnect the AC
cord plug at the socket outlet fi rst.
Using the clamper
Secure any excess cables with clamper as required.
AC cord connection and fi xing, cable fi xing
Speaker connection
1 2 Attach the clamper To remove from the unit:
Keep
pushing both
side snaps
hole
Bundle the cables
snaps
hooks
Set the
tip in the
hooks
To loosen:
Keep
pushing
the knob
knob
Insert the clamper
in a hole.
Red
Black
While pressing the lever,
insert the core wire.
Red
Black
Return the lever.
Connections